Archive

Posts Tagged ‘wireless’

WiGig alliance creates next-generation wireless networking standard

December 10th, 2009 No comments

wigigBy next year, the speed of Wi-Fi networks could be significantly faster thanks to a new generation of technology being announced today by the Wireless Gigabit Alliance (WiGig).

The WiGig 1.0 standard combines two different wireless technologies: 60-gigahertz wireless and Wi-Fi. The first technology uses the 60-gigahertz band of the wireless spectrum to create a 10-meter range wireless network. It also uses something called “beamforming” to extend the range of the 60-gigahertz network beyond 10 meters. The 60-gigahertz wireless network can support devices inside a room and can transfer data at 7 gigabits per second, or about 10 times faster than the fastest Wi-Fi networking available, 802.11n, which transfers data at 600 megabits per second.

Beyond the 10-meter range, whereupon the first technology attenuates, the network will automatically switch to Wi-Fi at the speed of 600 megabits per second. That network will have a 100-meter range, just like traditional 802.11n.

Mark Grodzinski, WiGig marketing chair and vice president of marketing at Wilocity, said in an interview that the completed specification will be made available to partners in the first quarter and that products are expected to launch for consumers sometime in 2010. More than 25 companies support the new standard, including giant chip makers such as Intel, Broadcom and Texas Instruments. New members in the group being announced today include Nvidia, TMC, SK Telecom and Advanced Micro Devices.

The WiGig standard will have competition. The rival Wireless High Definition Interface (WHDI) group completed its standard this week as well and will create a network that can transfer data in the 5-gigahertz spectrum at speeds up to 3 gigabits a second, with a range of 100 meters. And SiBEAM is heading the Wireless HD consortium to make 60-gigahertz wireless chips for networking inside a room. Some of the members such as Samsung and Sony are betting on all three horses.

The wireless chips from all three groups will likely be built into next-generation PCs, mobile handsets, TVs, displays, Blu-ray players, digital cameras and a variety of other gadgets. WHDI focuses on transferring video, while SiBEAM may focus on replacing cables in a home electronics network. WiGig, meanwhile, accommodates both the Wi-Fi and WHDI uses. Consumers may be confused by the three different standards, but Grodzinski says the competition will likely shake out as users figure out what network best suits them.

The demand will likely materialize for these wireless networks as consumers start sending video wirelessly from one room to another and multiple users try to watch different web-based videos in the home at the same time. The WiGig group has been working for about two years on the standard.

source >>

See the original post:
WiGig alliance creates next-generation wireless networking standard

Share/Save/Bookmark

Run Leopard (Mac OS 10.5) on a Dell Mini 9

February 4th, 2009 No comments

I’m a huge fan of ultra portables! They are small, light and just powerful enough to do what you need to get done. Sure I run Windows (in VMware), but for me the Mac OS better fits my lifestyle, but if you are looking for an ultra portable you are going to have to look beyond Cupertino.

So, when I got the Dell mini 9 all I wanted to do was put Leopard on it. With a little bit of tinkering and some help from a good blogging buddy Kevin Tofel I was able to painlessly install 10.5.4 on the little guy.

 

Kevin advised me that the chipset and processor of the Dell mini is so similar to the MSI Wind that a special slipstreamed version of 10.5 customized for the MSI Wind would be perfect (and painless) to get the little guy up and running.

The steps to Leopard-ize the mini are actually quite simple and easy to follow. After you download the slipstreamed ISO and burn the 3.2GB ISO to a DVD you boot up the Dell mini off a external DVD drive (Press 0 (Zero) at the BIOS screen) and installed Leopard as usual.

Once you complete the install all components except the wireless, ethernet, and sound worked. After some searching on the Dell forums I found two files that enabled the disabled Broadcom wireless adaptor and audio chipset, which you can find here.

Unzip the archive from the previous step and open Terminal in Leopard on the Dell mini. Type in sudo and drag the bcm43xx_enabler.sh icon to the Terminal window. Press the Enter key, type in your admin password on the keyboard and follow the instructions. (For those who don’t like to read – basically press Enter four times and restart).

When that is done, restart the computer and run the ALC268_Installer1 application (That was included in the archive) to enable sound chipset on the mini.

After you restart again and you have a fully functioning Mac OS enabled Dell mini 9.

UPDATE: I have had success updating to 10.5.5. Just use software update to download the update and reapply the patches. Proceed with caution on the update, milage may vary.

SOURCE

See more here:
Run Leopard (Mac OS 10.5) on a Dell Mini 9

Share/Save/Bookmark

Sony Ericsson takes mobile music into 2009 with the W705 Walkman™ phone and Wireless Home Audio System MBS-900

November 7th, 2008 No comments

Sony Ericsson takes mobile music into 2009 with the W705 Walkman™ phone and Wireless Home Audio System MBS-900

Credit:
Share/Save/Bookmark